Cảm Biến Quang Thu Phát Riêng Sensor Photo 1M Hanyoung PB-R1

Cảm Biến Quang / Hanyoung

Tình trạng: Còn hàng
Hãng sản xuất: Hanyoung
Mã thiết bị: PB-R1
Bảo hành: 12 Tháng
Xuất xứ: Hàn Quốc

Type name	Code				Contents
PB-	□	□	□	□	General Purpose Photo Sensor
Detection method and detection distance	T	7			7 m	Through-beam
		10			10 m
		15			15 m
	M	3			3 m	Retro-reflective(mirror)
	R	01			0.1 m	Diffuse – reflective
		04			0.4 m
		1			1 m
	D	04			0.4 m	Distance settable
Light source			–		Infrared light LED
Light source			R		Red light LED (※Note 1)
Output				N	NPN open collector output
Output				P	PNP open collector output

Model	NPN	T7N	T10RN	T15RN	M3RN	R01N	R04RN	R1N	D04N
	PNP	T7P	T10RP	T15RP	M3RP	R01P	R04RP	R1P	D04P
Sensing mode		Through-beam			Retro-reflective (mirror)	Diffuse-reflective			Distancesettable
Sensing distance		7 m	10 m	15 m	0.1 – 3 m (※Note 1)	0.1 m	0.4 m	1 m	0.4 m
Hysteresis distance		–				20% or less of detection distance
Detecting object		Opaque Ø12 mm or more			Ø75 mm more(Opaque)	White non-glossy paper (100 x 100 ㎜)
Light source (wavelength)		IR(850 ㎚)	RED	IR(850 ㎚)	RED	IR(850 ㎚)	RED	IR(850 ㎚)	IR(850 ㎚)
Current consumption		Emitter : 20 mA, Receiver : Max. 20 mA			Max. 30 mA
Power voltage		12 – 24 VDC ± 10 % (Ripple max. 10 %)
Control output		▪NPN / PNP open collector output ▪Load Current: max. 100mA (26.4VDC standard) ▪Residual voltage – NPN: max. 1 V, PNP:max. 1 V
Operation mode		Light ON / Dark ON switch
Protection circuit	Common	Power reverse connection protection, Output reverse connection protection, Output short-circuit over-current protection, Output short-circuit alarm(※Note 2)
	Individual	–			Mutual interference prevation function
Response time		1 ms or less
Insulation resistance		More than 20 ㏁ (500 VDC mega)
Noise immunity		Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V
Dielectric strength		1,000 VAC (50/60 Hz for 1 minute)
Vibration resistance		10 – 55 ㎐, double amplitude: 1.5 ㎜, X·Y·Z in each direction for 2 hours
Shock resistance		500 ㎨, X·Y·Z each direction 3 times
Ambient illumination		▪ Sunlight: max. 11000 lx, ▪ Incandescent lamp: max. 3000 lx
Ambient temperature		During operation : -25 ~ +55 ℃, During storage : -40 ~ +70 ℃ (Without condensation or icing)
Ambient humidity		35 ~ 85 % RH (Without condensation)
Degree of protection		IP 65 (IEC standard)
Approval
Material	Case	PBT GF30%
	Display	PC
	Lens	PC
Accessory	Common	Brackets A, Bolt (M3 X 12 mm), Volume driver
	individual	–			Mirror (HY-M5)	–
	Optional	Brackets B, Brackets C, Mirror(HY-M5S)
Weight		Approx. 90 g			Approx. 60 g	Approx. 50 g