Model | Code | Information | |||||
UP | – | inductive type proximity sensor | |||||
Sensing area size |
8 | M8 | |||||
12 | M12 | ||||||
18 | M18 | ||||||
30 | M30 | ||||||
Structure type | RM | Round type Shield | |||||
RD | Round type None Shield | ||||||
RLM | Long round type shield(M8 and M12 are excluded) | ||||||
RLD | Long round type None shield (M8 and M12 are excluded) | ||||||
Sensing Distance | 1.5 | Only for UP8-RM1.5 | |||||
2 | Only for UP8-RD2, UP12-RM2 | ||||||
4 | Only for UP12-RD4 | ||||||
5 | Only for UP18-RM5, UP18-RLM5 | ||||||
8 | Only for UP18-RD, UP18-RLD | ||||||
10 | Only for UP30-RM10, UP30-RLM10 | ||||||
15 | Only for UP30-RD15, UP30-RLD15 | ||||||
Power and Output type | N | D.C NPN output | |||||
P | D.C PNP output | ||||||
A | A.C 2 wire type | ||||||
T | D.C 2 wire type(Polarity) | ||||||
U | D.C 2 wire type(No polarity) ※ But M8 is excluded | ||||||
Output state | A | Normal open(N.O) | |||||
C | Normal close(N.C) | ||||||
Connection structure | * | No indication (Cable type) | |||||
CR | Relay connector type | ||||||
C | Connector type |
Model | NPN | UP8RM-1.5N | UP8RD-2N | UP12RM-2N | UP12RD-4N | UP18RM-5N | UP18RD-8N |
PNP | UP8RM-1.5P | UP8RD-2P | UP12RM-2P | UP12RD-4P | UP18RM-5P | UP18RD-8P | |
Size | M8 | M12 | M18 | ||||
Shield | Shield | None shield | Shield | None shield | Shield | None shield | |
Standard sensing object (mm) | Iron 8 X 8 X 1 | Iron 12 X 12 X 1 | Iron 18X18X1 | Iron 25 X 25 X 1 | |||
Sensing distance | 1.5 mm | 2 mm | 2 mm | 4 mm | 5 mm | 8 mm | |
Setting distance | 0 ~ 1.2 mm | 0 ~ 1.6 mm | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4 mm | 0 ~ 6.4 mm | |
Hysteresis | Less than 10% of sensing distance | ||||||
Response frequency | 800 Hz | 800 Hz | 400 Hz | 350 Hz | 200 Hz | ||
Power supply voltage | 12 ~ 24 V d.c (Usable voltage range 5 – 35V d.c) | ||||||
Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage : Max 1.5 V | ||||||
Current consumption | Max 6 mA | ||||||
Operation indication | Red LED | ||||||
Protective circuit | Power reversely comeded prodective circuit, surge prote ctive circuit and over current protective circuit are built in. |
||||||
connection structure | Cable type (standard cable length 2m), Relay connector type, Connector type | ||||||
Material | Case: stainless, Sensing surface: PBT, Cable holder: Polyester elastomer | Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer |
|||||
Weight | Cable type | approx. 60g | approx. 60g | approx. 70g | approx. 70g | approx. 120g | approx. 120g |
Relay connector type | None | None | approx. 30g | approx. 30g | approx. 80g | approx. 80g | |
Connector type | None | None | approx. 30g | approx. 30g | approx. 60g | approx. 60g |