Cảm Biến Quang Photoelectric Sensor Omron E3S-CL2

Cảm Biến Quang / Omron

Tình trạng: Còn hàng
Hãng sản xuất: Omron
Mã thiết bị: E3S-CL2
Bảo hành: 12 Tháng
Xuất xứ: Trung Quốc

Shape	Square type
Sensing method	Distance-setting
Sensing distance	White paper 200 x 200 mm, setting distance: 500 mm: 5 to 500 mm
Setting range	White paper 200 x 200 mm: 50 to 500 mm
Differential distance	10% max. of setting distance
Reflectivity characteristic (black-white error)	10% max. of setting distance
Light source	Infrared LED (860 nm)
Power supply voltage	10 to 30 VDC ripple (p-p) 10% included
Current consumption	50 mA max.
Control output	NPN/PNP open collector (selectable) 30 VDC max. 100 mA max. Residual voltage: 1.2 V max. (NPN output) Residual voltage: 2 V max. (PNP output)
Operation mode	Light-ON/Dark-ON selectable
Protective circuit	Output short-circuit protection, Power supply reverse polarity protection
Response time	Operate or reset: 2 ms max.
Sensitivity setting	6-turn endless adjustment (with indicator)
Ambient illuminance	Incandescent lamp: 5,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range (Operating)	-25 to 55 ℃ (with no freezing or condensation)
Ambient temperature range (Storage)	-40 to 70 ℃ (with no freezing or condensation)
Ambient humidity range (Operating)	35 to 85% (with no condensation)
Ambient humidity range (Strage)	35 to 95% (with no condensation)
Insulation resistance	20 MΩ min. (500 VDC megger)
Dielectric strength	1000 VAC 50/60 Hz 1 min
Vibration resistance	Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance	Destruction: 500 m/s² 3 times each in X, Y and Z directions
Degree of protection	IEC: IP67 NEMA: 6P (indoors only) Company standard: Oil-proof
Connection method	Pre-wired models (Cable length 2 m)
Indicator	Light indicator (orange), Stability indicator (green)
Weight	Package: Approx. 170 g
Accessories	Instruction manual, Mounting bracket, Adjustment driver, Hexagon bolt M4 x 12 (with Spring washers, Flat washers)
Material	Case: Zinc diecast Lens: Methacrylate resin Cover: Polyether sulfone Mounting Bracket: Stainless steel (SUS304)