Bộ Mã Hoá Vòng Quay Đo Chiều Dài 1MM Hanyoung PSC-MC

Tình trạng: Còn hàng
Hãng sản xuất: Hanyoung
Mã thiết bị: PSC-MC
Bảo hành: 12 Tháng
Xuất xứ: Hàn Quốc

Model	Code				Information
PSC-					Wheel type encoder
Min length measurement	MA				1 m (A,B phase output only)	Please refer to the length measurement code chart
	MB				1 cm
	MC				1 mm
	YA				1 YARD (A,B phase output only)
	YB				0.1 YARD
	YC				0.01 YARD
Output signal		AB			A, B phase output
Output signal		ABZ			A, B, Z Phase output
Output Circuit			N		NPN voltage output
			O		NPN open collector
			T		Totempole output
Power supply voltage				12	12 V DC (5 – 12 V DC)
Power supply voltage				24	24 V DC (12 – 24 V DC)

Model	code	Min measurement length	Gear ratio	Circumference of wheel	Number of pulse per 1 revolution
PSC	MA	1 m	4 : 1	250 mm	1 pulse
	MB	1 cm	4 : 1		100 pulse
	MC	1 mm	2 : 1		500 pulse
	YA	1 YARD	4 : 1	228.6 mm (0.25/Yd)	1 pulse
	YB	0.1 YARD	4 : 1		10 pulse
	YC	0.01 YARD	4 : 1		100 pulse

Model			PSC
Electrical specification	Phase difference on output		Phase difference between the A and B : T/4 ± T/8 (1 cycle of A phase = T)
	Response speed		100 K㎐ max.
	Rated voltage		5 – 12 V DC (±5 %), 12 – 24 V DC (±5 %)
	Current consumption		Max 70 ㎃
	Connection type		Cable extended type
	Control output	Voltage and open collector	Load voltage : max 30 V/load current : max 30 ㎃/Remaining voltage : max 0.4 V
		Totem pole	LOW (Load current : max 30 ㎃/Remaining voltage : max 0.4 V) HIGH (Load current : max 10 ㎃/Output voltage : above rated voltage – 1.5 V DC)
	Response time		Max 1 μs (Wire length : 1.5 m Iv sink = 30 ㎃)
Mechanical specification	Starting torque		Max 200 gf·㎝ (19.600 u N·m)
	Moment of inertia		Max 800 g·㎠ (8X10-6kg·m²)
	Permissible shaft loading		Radial : 0.1 ㎜ within, Thrust : 0.2 ㎜ within
	Max permissible revolution		5,000 rpm
	Bearing life		1.2 X 10/ (r/min) : time
Mechanical specification	Insulation resistance		Min 500 MΩ (Between the terminal and case)
	Dielectric strength		500 V AC (For 1 min in 60 ㎐ between the terminal and case)
	Vibration resistance		10 – 55 ㎐ (Period for 1 min), Double amplitude : 1.5 ㎜, for 2 hour each in X, Y and Z directions
	Shock resistance		Max 75 G
	Ambient temperature		-10 ~ 60 ℃ (No icing allowed), When storing : -25 ~ 85 ℃
	Ambient humidity		35 ~ 70 % R.H
	Wire specification		Number of strips : 5 P, Thickness : Ø 6.0 ㎜, Length : 1.5 m, Shield cable
	Weight		Approx. 625 g