Type | Appearance | Model No. | Output | Sensing range |
---|---|---|---|---|
Cable type | LX-101 | NPN open-collector transistor | 10 ±3mm 0.394 ±0.118 in |
|
LX-101-P | PNP open-collector transistor | |||
Plug-in connector type | LX-101-Z | NPN open-collector transistor | ||
LX-101-P-Z | PNP open-collector transistor |
Chức năng lựa chọn đèn LED tối ưu tự động
3 màu của đèn LED R ・ G ・ B được chọn tối ưu theo sự kết hợp màu sắc. Với chế độ Mark của LX-100, “Chức năng tự động chọn đèn LED tối ưu” tích hợp sẽ tự động chọn đèn LED cho độ tương phản lớn nhất (tỷ lệ S / N) giữa điểm đánh dấu và vùng nền (vùng không đánh dấu) để đảm bảo cảm nhận tối ưu. Để phát hiện ổn định hơn, cảm biến thực hiện các lựa chọn theo độ tương phản chứ không phải theo sự thay đổi ánh sáng phản xạ giữa điểm đánh dấu và vùng nền (vùng không đánh dấu).
[Ví dụ được hiển thị bên dưới đề cập đến ánh sáng phản chiếu trên phim đóng gói.
Các số liệu tuyệt vời được chỉ ra cho tỷ lệ lượng ánh sáng của đèn LED màu xanh lam và, để cảm nhận ổn định hơn, đèn LED màu xanh lam sẽ làm tăng hiệu ứng cảm nhận dấu hiệu này.]
■ Chế độ đánh dấu [Phản hồi tốc độ cực cao]
Chế độ cảm biến này tự động chọn một màu duy nhất từ 3 đèn LED R ・ G ・ B để đạt được thời gian phản hồi cực nhanh 45 μs. Chức năng tự động chọn đèn LED tối ưu tự động chọn đèn LED phù hợp nhất cho cảm biến. Chức năng này hoàn hảo cho cảm biến cực nhanh.
Chế độ màu [Phân biệt độ chính xác cao]
Tất cả 3 đèn LED R ・ G ・ B đều sáng lên và khả năng phân biệt màu sắc của dấu hiệu có độ chính xác cao xảy ra bằng cách sử dụng tỷ lệ ánh sáng phản xạ R ・ G ・ B. Chức năng này cho phép phát hiện hiệu quả các phim có các mẫu xung quanh khu vực của nhãn hiệu.
Phân biệt màu đánh dấu độ chính xác cao
Chế độ Màu trên dòng LX-100 sử dụng tất cả 3 đèn LED R ・ G ・ B để xác định tỷ lệ R ・ G ・ B của màu nhãn.
Bộ chuyển đổi A / D 12 bit tích hợp cho phép đánh giá độ phân giải 1 / 4.000 độ chính xác cao. Hình dưới đây là mô tả đồ họa của quá trình này.
Type | Cable type | Plug-in connector type | |
---|---|---|---|
Model No. | NPN output | LX-101 | LX-101-Z |
PNP output | LX-101-P | LX-101-P-Z | |
CE marking directive compliance | EMC Directive, RoHS Directive | ||
Sensing range | 10 ± 3 mm 0.394 ± 0.118 in | ||
Spot size | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | ||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||
Current consumption | Normal mode: 750 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
||
Output 1 (OUT) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) |
|
Short-circuit protection | Incorporated | ||
Output operation | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching), Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) |
||
Output 2 (OUT) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current) |
– | |
Short-circuit protection | Incorporated | – | |
Output operation | Inverted operation of the output 1 | – | |
Response time | Mark mode: 45 μs or less, Color mode: 150 μs or less | ||
Teaching input | <NPN output type> NPN non-contact input ・Signal condition: High… +5 V to +V, or open Low… 0 to +2 V (source current: 0.5 mA or less) ・Input impedance: 10 kΩ approx. <PNP output type> PNP non-contact input ・Signal condition: High… +4 V to +V (sink current: 3 mA or less) Low… 0 to +0.6 V, or open ・Input impedance: 10 kΩ approx. |
||
Digital display | 4-digit red LED display | ||
Sensitivity setting | Mark mode: 2-level teaching / Full-auto teaching, Color mode: 1-level teaching | ||
Fine sensitivity adjustment function | Incorporated | ||
Timer function | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) |
||
Protection | IP67 (IEC) | ||
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
Ambient illuminance | Incandescent light: 3,000 or less lx at the light-receiving face | ||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | ||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | ||
Emitting element | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | ||
Material | Enclosure: PBT, Display cover: Polycarbonate, Operation buttons: Silicone rubber, Lens: Glass, Lens holder: Aluminum | ||
Cable | 0.2 mm2 5-core cabtyre cable, 2 m 6.562 ft long |
(Note 2) | |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
||
Weight | Net weight: 120 g approx., Gross weight: 180 g approx. |
Net weight: 55 g approx., Gross weight: 120 g approx. |
|
Accessory | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |