Hướng Dẫn Cài Đặt Đồng Hồ Đa Năng CET PMC-33M-A

10/09/2020

Label	Parameters	Description	Range	Default
Menu Main Sub	Parameters	Description	Range	Default
PROGRAMMING	Programming	Setup Configuration	/	/
PASSWORD	Password	Enter Password	0 to 9999	0
PASS SET		Enter sub Menu to change password?	YES/NO	NO
NEW PASS	New Password	Change password	0000 to 9999	“0”
SYS SET		Enter sub Menu to set basic parameter?	YES/NO	NO
TYPE	Wiring Mode	Meter’s Wiring Connection	DEMO/1P2W/ 1P3W/3P3W/3P4W	3P4W
PT1	PT Primary	PT Primary Voltage	1 to 1,000,000V	100V
PT2	PT Secondary	PT Secondary Voltage	1 to 690V	100V
CT1	CT Primary	CT Primary Current	1 to 30,000A	5A
CT2	CT Secondary	CT Secondary Current	1 to 5A	5A
PF	P.F Convention	P.F Convention	IEC/IEEE/-IEEE	IEC
kVA	kVA Calculation	kVA Calculation Method	V/S (V=vector S=Scalar)	V
THD SET.	THD Calculation	Select between % of fundamental or % of RMS	THDF/THDR	THDF
I1 REV	Phase A CT	Reverse Phase A CT Polarity	YES/NO	NO
I2 REV	Phase B CT	Reverse Phase B CT Polarity	YES/NO	NO
I3 REV	Phase C CT	Reverse Phase C CT Polarity	YES/NO	NO
BLTO	Backlight Timeout		0 to 6 mins	5
COM SET		Enter sub menu to set Comm. Parameter?	YES/NO	NO
PRO	Protocol	Protocol	Modbus	Modbus
ID	Meter Address	Unit ID	1-247	100
BAUD	Baud Rate	Data rate in bits per second	1200/2400/4800/9600 /19200/38400bps	9600
CONFIG	Comm. Port	Data Format	8N2/8O1/8E1	8E1
DMD SET
PERIOD	Period	Demand Period	1 to 60 (min)	15
NUM	Number	No.of Sliding Windows	1 to 15	1
PRED RESP	Predicted Response	Predicted Demand Response	70 to 99 (%)	70
ENGY SET	Preset Energy Values	Enter sub menu to preset Energy Values	YES/NO	NO
LED	Led Pulsing	Enable kWh or kvarh LED Energy Pulsing	OFF/P/Q	P (kWh)
CNST	Pulse Constant	Pulsse Constant	1000/3200	1000
IMP	kWh Import	Preset kWh Import	0 to 99,,999,999.9	7803
EXP	kWh Export	Preset kWh Export	0 to 99,,999,999.9	7803
IMP	kvarh Import	Preset kvarh Import	0 to 99,,999,999.9	7803
EXP	kvarh Export	Preset kvarh Export	0 to 99,,999,999.9	7803
	kVAh	kVAh Value	0 to 99,,999,999.9	7803
CLR SET		Enter sub menu to clear data	YES/NO	NO
CLR ENGY	Clear Energy	Clear the 3Φ- total and per-phase energy registers	YES/NO	NO
CLR MXMN	Clear Max/Min Logs	Clear Max/Min Log of this month (Since Last Reset)	YES/NO	NO
CLR DMD	Clear Demand	Clear MaxiumDemand of this month (Since Last Reset)	YES/NO	NO
CLR DIC	Clear DI Counter	Clear All DI Counter	YES/NO	NO
CLR SOE	Clear SOE	Clear SOE log	YES/NO	NO
CLR OPTM	Clear Operating Time	Clear Device Operating Time	YES/NO	NO
CLR ALL	All data	Clear All of the above	YES/NO	NO
TM SET	Set date and time	Enter sub menu to set time?	YES/NO	NO
DAT	Date	Enter the current Date	YYYY-MM-DD	/
CLK	Clock	Enter the current Time	HH:MM:SS	/
INFO		Vew Device Information (read only)	YES/NO	/
FW	Firmware Version	Firmware Version	e.g 1.00.00 means V1.00.00	/
PRO VER	Protocol Version	Protocol Version	e.g 2.1 means V2.1	/
UPDAT	Update Date	Firmware Update Date	e.g 20160603	/
	Serial Number	Serial Number	e.g 1506005094	/

PMC-33M CET User Manual

THƯƠNG HIỆU

SẢN PHẨM MỚI

Hướng Dẫn Cài Đặt Đồng Hồ Đa Năng CET PMC-33M-A

Cùng chuyên mục

LIÊN HỆ

MENU

CHÍNH SÁCH