Menu

THƯƠNG HIỆU

Khởi Động Mềm Soft Starter ABB 3P 380V 160kW PSE300-600-70-1

  • Tình trạng: Còn hàng
  • Hãng sản xuất: ABB
  • Mã thiết bị: PSE300-600-70-1
  • Bảo hành: 12 Tháng
  • Xuất xứ: Trung Quốc
Giá liên hệ
Quý khách vui lòng liên hệ báo giá ưu đãi đối với số lượng lớn.
  • Rated Operational Voltage: 208 … 600 V AC
  • Rated Control Supply Voltage (Us): 100 … 250 V AC
  • Rated Control Circuit Voltage (Uc): DC Operation 24 V
  • Rated Frequency (f): 50/60 Hz Main Circuit 50 / 60 Hz
  • Rated Operational Power – In-Line Connection (Pe):
    (230 V) 90 kW
    (400 V) 160 kW
    (500 V) 200 kW
  • Rated Operational Current – In-Line Connection (Ie): 300 A
  • Service Factor Percentage: 100 %
  • Overload Protection: Built-in electronic overload protection
  • Integrated Electronic Overload: Yes
  • Adjustable Rated Motor Current Ie: 30 … 100 %
  • Starting Capacity at Maximum Rated Current Ie: 4xIe for 10s
  • Ramp Time:
    0 … 30 second [unit of time]
    1 … 30 second [unit of time]
  • Initial Voltage During Start: 30 … 70 %
  • Step Down Voltage Special Ramp: No %
  • Current Limit Function: 1.5 … 7xIe
  • Switch for Inside Delta Connection: No
  • Run Signal Relay: Yes
  • By-pass Signal Relay: Yes
  • Fault Signal Relay: Yes
  • Overload Signal Relay: Yes
  • Analog Outputs: 4…20 mA
  • Signal indication completed start ramp (LED): Green
  • Signal indication ready to start/standby ON (LED): Green
  • Signal indication running R (LED): Green
  • Signal indication ramping up/down (LED): Green
  • Signal indication protection (LED): Yellow
  • Signal indication fault (LED): Red
  • Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: 10
  • Communication: FiledBusPlug(Optional)
  • Degree of Protection: IP00
  • Terminal Type: Main Circuit: Bars
  • Connecting Capacity Main Circuit:
    Hole Diameter 8.5 mm
    Rigid 1/2 x 2.5 … 70 mm²
    Width and Thickness 17.5×5 mm
  • Connecting Capacity Control Circuit:
    Rigid 1 x 2.5 mm²
    Rigid 2 x 1.5 mm²
  • Connecting Capacity Supply Circuit: Rigid 1 x 2.5 mm²
  • Tightening Torque:
    Control Circuit 0.5 N·m
    Main Circuit 28 N·m
    Supply Circuit 0.5 N·m