Modul EtherCAT Coupler Unit Omron NX-ECC202

Bộ Lập Trình PLC / Omron

Tình trạng: Còn hàng
Hãng sản xuất: Omron
Mã thiết bị: NX-ECC202
Bảo hành: 12 Tháng
Xuất xứ: Nhật Bản

Item		Specification
Item		NX-ECC201	NX-ECC202	NX-ECC203
Number of connectable NX Units		63 Units max. *1
Send/receive PDO data sizes		Input: 1,024 bytes max. (including input data, status, and unused areas) Output: 1,024 bytes max. (including output data and unused areas)
Mailbox data size		Input: 256 bytes Output: 256 bytes
Mailbox		Emergency messages and SDO requests
*Refreshing methods 2**		• Free-Run refreshing • Synchronous I/O refreshing • Time stamp refreshing		• Free-Run refreshing • Synchronous I/O refreshing • Time stamp refreshing • Task period prioritized refreshing
Node address setting range		When the settable node address range for the built-in EtherCAT port is 1 to 512 *3 • Set on switches: 1 to 199 • Set with the Sysmac Studio: 1 to 512
Node address setting range		When the settable node address range for the built-in EtherCAT port is 1 to 192 *3 • Set on switches: 1 to 192 • Set with the Sysmac Studio: 1 to 192
I/O jitter performance		Inputs: 1 μs max. Outputs: 1 μs max.
Communications cycle in DC Mode		250 to 4,000 μs4 5		125 to 10,000 μs 3 4 *6
Unit power supply *7	Power supply voltage	24 VDC (20.4 to 28.8 VDC)
	NX Unit power supply capacity	10 W max. Refer to Installation orientation and restrictions for details.
	NX Unit power supply efficiency	70%
	Isolation method	No isolation between NX Unit power supply and Unit power supply terminals
	Current capacity of power supply terminals	4 A max.
I/O power supply *7	Power supply voltage	5 to 24 VDC (4.5 to 28.8 VDC) *8
	Maximum I/O power supply current	4 A	10 A
	Current capacity of power supply terminals	4 A max.	10 A max.
NX Unit power consumption		1.45 W max.		1.25 W max.
Current consumption from I/O power supply		10 mA max. (for 24 VDC)
Dielectric strength		510 VAC for 1 min, leakage current: 5 mA max. (between isolated circuits)
Insulation resistance		100 VDC, 20 MΩ min. (between isolated circuits)
External connection terminals		Communications Connector For EtherCAT communications. • RJ45 × 2 (shielded) • IN: EtherCAT input data, OUT: EtherCAT output data
		Screwless Clamping Terminal Block For Unit power supply, I/O power supply, and grounding. Removable.
		Peripheral USB Port For Sysmac Studio connection. • Physical layer: USB 2.0-compliant, B-type connector • Transmission distance: 5 m max.
Dimensions		46 × 100 × 71 mm (W×H×D)
Weight		170 g max.